Mud and slurry pumps serve a completely different duty cycle from clean water submersibles — they must pass high concentrations of solids without clogging, while withstanding the abrasive wear those solids inflict on impellers, casings, and seals. Xanausun supplies both SMC and Wilo dewatering mud pumps for borewell flushing, construction site dewatering, and industrial drainage.
Key Selection Criteria
- Solids passage diameter: The free passage diameter must exceed the largest solid particle in the fluid. Borewell drill cuttings typically range from 5–20mm; construction sludge can exceed 30mm.
- Abrasion resistance: Chrome iron impellers last 5–10x longer than standard cast iron in high-sand slurries
- Non-clog impeller: Vortex or single-channel impellers don't block when fibrous material is present
SMC Mud Pump Specifications
| Pump Model | Phase |
|---|---|
| 1.0 HP | SINGLE |
| 1.5 HP | SINGLE |
| 2.0 HP | SINGLE |
| 3.0 HP | SINGLE |
| 1.0 HP | THREE |
| 2.0 HP | THREE |
| 3.0 HP | THREE |
| 5.0 HP | THREE |
| 7.5 HP | THREE |
| 10.0 HP | THREE |
Common Applications in Ahmedabad
Borewell flushing during drilling, construction site pit dewatering during monsoon, and industrial effluent transfer are the three primary applications we supply mud pumps for in Ahmedabad.